[. . . ] UK If you already have a CDROM, DVDROM or other drive attached to your computer, go to step 7. Find the flat ribbon (IDE) cable, which goes from your hard disc drive to your motherboard. Next to the connection of this cable on your motherboard is the second IDE connector/cable. Attach your new drive to this second cable, which goes into the second IDE connector. [. . . ] Raccordez le nouveau lecteur à ce second câble qui est branché sur le second connecteur IDE. UK Find the cable that goes from your motherboard to your CDROM, DVDROM or other drive and attach your new drive as SLAVE onto this cable. UK These are the connections (on the back of your drive) you will have to use for connecting the drive to the computer. UK Choose master or slave (default) for the jumper, as explained in step 6 or 7. UK Find the IDE-cable which may look like this example: A: Coloured line. UK Now insert the installation disc delivered with the drive in your drive and follow the instructions. (If not, double-click "My Computer", then the "Philips RW" drive icon and finally "Setup. UK Choose your product (according to what you wrote down in the previous step). How to use it and what software applications you need to perform your tasks, is described in the next chapters of this User Manual. After you have set the region, you can change it 4 more times (the last setting will remain permanent). For VideoCD, you will have to navigate using the extra controls (see step 6). UK The controls from PowerDVD ­ A:Volume control; B: Play control (play, stop, pause, forward, . The application software used here is: Nero - Burning Rom from Ahead Software UK Choose the device in which you put your source DVD. If you are not sure or if you have a slower drive, unmark the checkbox. Insert an empty DVD in your ReWriter D Legen Sie die Quell-Disk in das in Schritt 5 gewählte Laufwerk. The application software used here is: Nero - Burning Rom from Ahead Software UK Choose the device in which you want to put your source CD. If you are not sure or if you have a slower drive, unmark the checkbox. Insert an empty DVD in your ReWriter D Legen Sie die Quell-Disk in das in Schritt 5 gewählte Laufwerk. [. . . ] Insert an empty DVD in your ReWriter D Legen Sie die Quell-Disk in das in Schritt 5 gewählte Laufwerk. The application software used here is: Nero - Burning Rom from Ahead Software UK Drag the selected file(s) and/or folder(s) you want to have on your new DVD to the left side of the screen. The application software used here is: Nero - Burning Rom from Ahead Software UK Drag the selected file(s) and/or folder(s) you want to have on your new CD to the left side of the screen. This manual shows you an example of how to make an Audio CD which can be played in any CDPlayer This product is for personal use only. [. . . ]